|
|
|
National Stock Number:
5905-00-259-9750
Federal Supply Class:
5905
National Item Identification Number:
002599750
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 4046 | 12763 | DYNALEC CORPORATION | | 4046 | 20049 | THE ELECTRIC TACHOMETER CORP. |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 1.094 INCHES NOMINAL | | BODY LENGTH | 0.515 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION | | FIRST FLAT LENGTH | 0.375 INCHES NOMINAL | | FLAT HEIGHT | 0.218 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE LOCATION | AT 3 OCLOCK OR AT 6 OCLOCK OR AT 9 OCLOCK OR AT 12 OCLOCK | | NONTURN DEVICE RADIUS | 0.500 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 100.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.875 INCHES NOMINAL | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT STYLE | ROUND, FLATTED | | SPECIAL FEATURES | HAS 0.188 IN HOLE DRILLED THROUGH SHAFT 0.375 IN FROM END PARALLEL TO FLATTED SURFACE | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|