|
|
|
National Stock Number:
5905-00-260-2627
Federal Supply Class:
5905
National Item Identification Number:
002602627
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 11040566-1 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 2901X-501 | 14304 | L3HARRIS TECHNOLOGIES, INC. | | 2901X501 | 04454 | SENSOR SYSTEMS, L.L.C. | | 3252X-5000HMS | 32997 | BOURNS INC |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY HEIGHT | 0.590 INCHES MAXIMUM | | BODY LENGTH | 0.500 INCHES NOMINAL | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES | | BODY WIDTH | 0.195 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.150 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.300 INCHES NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | MOUNTING SLOT WIDTH | 0.250 INCHES NOMINAL | | MOUNTING METHOD | TERMINAL | | OVERALL HEIGHT | 0.590 INCHES MAXIMUM | | OVERALL LENGTH | 0.530 INCHES NOMINAL | | OVERALL WIDTH | 0.195 INCHES NOMINAL | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.076 INCHES NOMINAL | | SHAFT LENGTH | 0.030 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION | | TERMINAL LENGTH | 0.400 INCHES MINIMUM | | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW | | TERMINAL TYPE AND QUANTITY | 3 PIN | | TEST DATA DOCUMENT | 18876-11040566 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|