|
|
|
National Stock Number:
5905-00-295-4026
Federal Supply Class:
5905
National Item Identification Number:
002954026
Description:
RESISTOR,FIXED,WIRE WOUND,INDUCT
Detail:
INC 37403 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
|
Manufacturer Information:
| MIL-DTL-15109 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILR15109 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | S-1748808 | 11660 | WESTINGHOUSE ELECTRIC CORP CONTROL BUSINESS UNIT | | S1748808 | 79500 | WESTINGHOUSE ELECTRIC CORP |
|
Techincal Specification:
| AMBIENT TEMP AT FULL RATED POWER | 50.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 425.0 | | BODY DIAMETER | 2.062 INCHES NOMINAL | | BODY LENGTH | 8.812 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 10.000 INCHES NOMINAL | | ELECTRICAL RESISTANCE | 0.310 OHMS | | INCLOSURE TYPE | UNINCLOSED | | MOUNTING HOLE SIZE | 0.531 INCHES NOMINAL | | NONDEFINITIVE SPEC/STD DATA | EW FORM | | POWER DISSIPATION RATING IN WATTS | 600.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -10.000 TO 10.000 | | SPECIAL FEATURES | MAGNETIC PERMEABILITY SHALL BE LESS THAN 1.2 BEFORE FABRICATION AND NOT GREATER THAN 2.0 AFTER FABRICATION AS MEASURED IN A 200 OERSTED FIELD BY A PERMEABILITY INDICATOR SPECIFIED IN MILITARY SPECIFICATION MIL-I-17214 | | STYLE DESIGNATOR | RADIAL TERMINAL EACH END | | TERMINAL LENGTH | 1.875 INCHES NOMINAL | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.500 INCHES NOMINAL |
|
|