5905-00-295-5139 RESISTOR,FIXED,FILM Index 5905-00-295-5143 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-295-5142

Federal Supply Class:
5905

National Item Identification Number:
002955142

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
116628510001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
1368095036APPLIED DEVICES CORP
200-1-22814945ASTRO ELECTRONICS INC


Techincal Specification:
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 ALL SECTIONS
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG120.0
ANGLE OF MOUNTING HOLE IN DEG120.0
BODY DIAMETER2.000 INCHES NOMINAL
BODY LENGTH1.555 INCHES MINIMUM AND 1.595 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION356.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS ALL SECTIONS
FEATURES PROVIDEDNONMETALLIC SHAFT
FIXED TAP QUANTITY PER SECTION1 1ST SECTION
FUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS LINEAR
FUNCTION CONFORMITY PER SECTIONALL SECTIONS INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.15 TO 0.15 ALL SECTIONS
PILOT LENGTH0.0620 INCHES NOMINAL
PILOT DIAMETER0.1865 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE1.00 INCH-OUNCES
MAXIMUM STARTING TORQUE2.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY3
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL
MOUNTING LIP DIAMETER2.0000 INCHES NOMINAL
MOUNTING METHODCLAMP RING
MOUNTING HOLE/STUD CIRCLE DIAMETER1.250 INCHES NOMINAL
OVERALL DIAMETER2.422 INCHES MINIMUM AND 2.558 INCHES MAXIMUM
OVERALL LENGTH2.160 INCHES MINIMUM AND 2.240 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS4.0 FREE AIR ALL SECTIONS
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SCREW THREAD DIAMETER0.164 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNC
SECTION QUANTITY2
SHAFT LENGTH0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM
SHAFT DIAMETER0.250 INCHES NOMINAL
SHAFT STYLEROUND
TERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY7 TAB, SOLDER LUG
UNDERCUT DIAMETER0.187 INCHES NOMINAL
UNDERCUT WIDTH0.0620 INCHES MINIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us