5905-00-307-0960, RESISTOR,VARIABLE,NONWIRE WOUND,

5905-00-307-0961 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-307-0960

Federal Supply Class:
5905

National Item Identification Number:
003070960

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

106-400-0044	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
49040-2A	04454	SENSOR SYSTEMS, L.L.C.
49040-2A	10112	GENERAL DYNAMICS MOTION CONTROL LLC

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	333.5 NOMINAL
ELECTRICAL RESISTANCE PER SECTION	5.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION
BODY DIAMETER	0.880 INCHES MAXIMUM
BODY LENGTH	0.520 INCHES MAXIMUM
BODY STYLE	CYLINDRICAL SERVO MOUNTED
FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTION	SINGLE SECTION ABSOLUTE LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.20 TO 0.20 SINGLE SECTION
LATERAL RUNOUT	0.001 INCHES
OVERALL DIAMETER	1.040 INCHES MAXIMUM
OVERALL LENGTH	1.100 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE	0.50 INCH-OUNCES
MAXIMUM STARTING TORQUE	0.50 INCH-OUNCES
MOUNTING LIP DEPTH	0.0600 INCHES NOMINAL
MOUNTING LIP DIAMETER	0.8800 INCHES MAXIMUM
MOUNTING METHOD	CLAMP RING
NONTURN DEVICE LOCATION	AT 6 OCLOCK
NONTURN DEVICE RADIUS	0.312 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
PILOT LENGTH	0.0600 INCHES NOMINAL
PILOT DIAMETER RUNOUT	0.001 INCHES
PILOT DIAMETER	0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL
SECTION QUANTITY	1
SHAFT DIAMETER	0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
SHAFT LENGTH	0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM
SHAFT RADIAL PLAY	0.001 INCHES
SHAFT RUNOUT	0.001 INCHES
SHAFT END PLAY	0.005 INCHES
SHAFT STYLE	ROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-150.0 TO 300.0 SINGLE SECTION
TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY	3 TURRET
UNDERCUT DIAMETER	0.74700 INCHES MINIMUM AND 0.75300 INCHES MAXIMUM
UNDERCUT WIDTH	0.0600 INCHES NOMINAL

Click here to Register for Free 30-day Trial