|
|
|
National Stock Number:
5905-00-322-5494
Federal Supply Class:
5905
National Item Identification Number:
003225494
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 3495S426-503 | 80294 | BOURNS INSTRUMENTS INC | | RVP3S167 | 99957 | BOWMAR/TIC INC SUB OF BOWMAR INSTRUMENT CORP | | SMB120066 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 358.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 50.0 OHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION | | BODY DIAMETER | 3.000 INCHES NOMINAL | | BODY LENGTH | 1.281 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL STUDS MOUNTED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION | | OVERALL LENGTH | 2.031 INCHES NOMINAL | | LATERAL RUNOUT | 0.010 INCHES | | MAXIMUM RUNNING TORQUE | 1.20 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 3 | | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.500 INCHES NOMINAL | | MOUNTING METHOD | THREADED HOLE | | SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNC | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT BEARING TYPE | SLEEVE | | SHAFT LENGTH | 0.750 INCHES NOMINAL | | SHAFT END PLAY | 0.005 INCHES | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND, SLOTTED | | PILOT DIAMETER RUNOUT | 0.00150 INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TURRET |
|
|