|
|
|
National Stock Number:
5905-00-324-5791
Federal Supply Class:
5905
National Item Identification Number:
003245791
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. Opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
|
Manufacturer Information:
| 8017865 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | D178619A3832 | 00656 | AEROVOX CORP. | | D178619A3832 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO | | D178619A3832 | 72982 | ERIE SPECIALTY PRODUCTS INC | | D178619A3832 | 75042 | TRW INC TRW ELECTRONIC COMPONENTS IRC FIXED RESISTORS PHILADELPHIA DIV |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 38.300 KILOHMS | | AMBIENT TEMP AT FULL RATED POWER | 66.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 146.0 | | BODY DIAMETER | 0.578 INCHES NOMINAL | | BODY LENGTH | 1.500 INCHES NOMINAL | | INCLOSURE TYPE | HERMETICALLY SEALED | | POWER DISSIPATION RATING IN WATTS | 0.750 FREE AIR | | REACTANCE CHARACTERISTIC | INDUCTIVE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | +55.0 TO 105.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | +0.0 TO 60.0 | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 64959-D178618 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) AND 64959-D178619 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) AND 64959-D178620 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|