|
|
|
National Stock Number:
5905-00-325-5446
Federal Supply Class:
5905
National Item Identification Number:
003255446
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
| 5E4720-14-0011 | 05347 | ULTRONIX INC | | 5E4720-14-0011 | 18612 | VISHAY INTERTECHNOLOGY, INC. | | 5E4720/14-0011 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 422.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 25.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 | | BODY HEIGHT | 0.115 INCHES MAXIMUM | | BODY LENGTH | 0.312 INCHES MAXIMUM | | BODY WIDTH | 0.300 INCHES MINIMUM AND 0.340 INCHES MAXIMUM | | CUBIC MEASURE | 0.012 CUBIC INCHES | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.300 FREE AIR | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.005 | | RELIABILITY INDICATOR | ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -0.010 TO 0.010 | | SPECIAL FEATURES | BURN-IN | | STYLE DESIGNATOR | TERMINALS ONE EDGE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -5.0 TO 5.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | TERMINAL LENGTH | 0.875 INCHES MINIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 73030-5E4720/14 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|