|
|
|
National Stock Number:
5905-00-483-0170
Federal Supply Class:
5905
National Item Identification Number:
004830170
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 204853 | 03271 | MICRO-LECTRIC INC | | 204853 | 09017 | EDO | | 55-90-043 | 18065 | SAMARIUS PRECISION INSTRUMENTS, INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 12.5 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BEARING TYPE | BALL SHAFT | | BODY DIAMETER | 1.062 INCHES NOMINAL | | BODY LENGTH | 0.750 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FEATURES PROVIDED | NONMETALLIC SHAFT | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION | | LATERAL RUNOUT | 0.001 INCHES | | OVERALL DIAMETER | 1.264 INCHES MAXIMUM | | OVERALL LENGTH | 1.375 INCHES NOMINAL | | MAXIMUM STARTING TORQUE | 0.25 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.0620 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.001 INCHES | | PILOT DIAMETER | 0.8200 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 3.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.120 INCHES NOMINAL | | SHAFT LENGTH | 0.625 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT END PLAY | 0.005 INCHES | | SHAFT STYLE | ROUND | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 180.0 SINGLE SECTION | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 6250.0 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -17.36 TO 17.36 OHMS SINGLE SECTION AND -0.5 TO 0.5 OHMS SINGLE SECTION | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 4 TURRET | | TEST DATA DOCUMENT | 50222-204853 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 0.968 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
|
|