5905-00-586-5309, RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-586-5309

Federal Supply Class:
5905

National Item Identification Number:
005865309

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

MIL-PRF-94/5	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILR94-5	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV4SBYSD102A	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV4SBYSD102B	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

ELECTRICAL RESISTANCE PER SECTION	1.0 KILOHMS SINGLE SECTION
ACTUATOR TYPE	SINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURE	STOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	120.0 SINGLE SECTION
BODY DIAMETER	1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM
BODY LENGTH	0.719 INCHES MINIMUM AND 0.969 INCHES MAXIMUM
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
DEVICE DESIGN TYPE	NONTURN AT 9 OCLOCK
FEATURES PROVIDED	PANEL SEAL
OVERALL DIAMETER	1.515 INCHES MAXIMUM
OVERALL LENGTH	1.750 INCHES MINIMUM AND 2.109 INCHES MAXIMUM
MAXIMUM STARTING TORQUE	6.00 INCH-OUNCES
MAXIMUM STOP TORQUE	128.00 INCH-OUNCES
MOUNTING BUSHING LENGTH	0.375 INCHES NOMINAL
MOUNTING METHOD	STANDARD BUSHING
NONTURN DEVICE RADIUS	0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM
OPERATING POSITION	ANY POSITION OF ROTATIONAL TRAVEL
POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	330.0 MINIMUM AND 340.0 MAXIMUM
SCREW THREAD DIAMETER	0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH	32.0
SCREW THREAD SERIES DESIGNATOR	UNEF
SECTION QUANTITY	1
SHAFT DIAMETER	0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
SHAFT LENGTH	0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
SPECIFICATION/STANDARD DATA	81349-MIL-R-94/5 GOVERNMENT SPECIFICATION
SWITCH CONTACT ARRANGEMENT	SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED
SWITCH CURRENT TYPE AND RATING IN AMPS	3.000 AC
SWITCH TYPE	PULL
SWITCH VOLTAGE RATING IN VOLTS	117.0
TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY	5 TAB, SOLDER LUG
TEST DATA DOCUMENT	81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial