|
|
|
National Stock Number:
5905-00-593-8255
Federal Supply Class:
5905
National Item Identification Number:
005938255
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 1472231 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 71-976 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 357.0 MINIMUM AND 359.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS ALL SECTIONS | | ACTUATOR TYPE | DOUBLE ENDED SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | BODY DIAMETER | 3.000 INCHES NOMINAL | | BODY HEIGHT | 3.256 INCHES NOMINAL | | BODY LENGTH | 4.433 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 ALL SECTIONS | | OVERALL LENGTH | 5.183 INCHES NOMINAL | | MAXIMUM RUNNING TORQUE | 4.30 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 5.70 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 3.0000 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER | 2.8740 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 1ST SECTION AND -5.0 TO 5.0 2ND SECTION AND -1.0 TO 1.0 3RD SECTION AND -1.0 TO 1.0 4TH SECTION AND -5.0 TO 5.0 5TH SECTION AND -1.0 TO 1.0 6TH SECTION AND -1.0 TO 1.0 7TH SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 7 | | SHAFT DIAMETER | 0.249 INCHES NOMINAL | | SHAFT LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 26 TURRET | | TEST DATA DOCUMENT | 10001-1472231 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.820 INCHES MINIMUM AND 2.825 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
|
|