|
|
|
National Stock Number:
5905-00-615-3467
Federal Supply Class:
5905
National Item Identification Number:
006153467
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 12Z13110-9460 | 94135 | NAVAL ORDNANCE STANDARDS | | 20166 | 10112 | GENERAL DYNAMICS MOTION CONTROL LLC | | 2064 | 04454 | SENSOR SYSTEMS, L.L.C. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS ALL SECTIONS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 20.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 100.0 ALL SECTIONS | | BODY HEIGHT | 0.875 INCHES NOMINAL | | BODY LENGTH | 2.250 INCHES NOMINAL | | BODY STYLE | RECTANGULAR | | BODY WIDTH | 0.500 INCHES NOMINAL | | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 ALL SECTIONS | | LONGITUDINAL ACTUATOR EFFECTIVE ELECTRICAL STROKE LENGTH | 0.645 INCHES NOMINAL | | LONGITUDINAL ACTUATOR TRAVEL | 0.645 INCHES NOMINAL | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING METHOD | THREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | SCREW THREAD DIAMETER | 0.112 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 40.0 | | SCREW THREAD SERIES DESIGNATOR | UNC | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.156 INCHES NOMINAL | | SHAFT LENGTH | 1.414 INCHES NOMINAL | | SHAFT STYLE | ROUND | | SPECIAL FEATURES | MOUNTING HOLES SPACED 2.000 IN. CENTER TO CENTER | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2500.0 ALL SECTIONS | | TAP LOCATION TOLERANCE PER SECTION | -1.25 TO 1.25 OHMS ALL SECTIONS | | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW | | TERMINAL TYPE AND QUANTITY | 8 SCREW |
|
|