5905-00-628-1301, RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-628-1301

Federal Supply Class:
5905

National Item Identification Number:
006281301

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

10211050-4

18876

U S ARMY AVIATION AND MISSILE COMMAND

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	6120.0 MINIMUM AND 9720.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	100.0 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
BEARING TYPE	SLEEVE SHAFT
BODY HEIGHT	0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM
BODY LENGTH	1.296 INCHES MINIMUM AND 1.328 INCHES MAXIMUM
BODY STYLE	RECTANGULAR BUSHING MOUNTED
BODY WIDTH	0.249 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
CUBIC MEASURE	0.123 CUBIC INCHES
FEATURES PROVIDED	HUMIDITY PROOF
FRAGILITY FACTOR	MODERATELY RUGGED
MAXIMUM RUNNING TORQUE	8.00 INCH-OUNCES
MAXIMUM STARTING TORQUE	8.00 INCH-OUNCES
MOUNTING BUSHING LENGTH	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
MOUNTING METHOD	STANDARD BUSHING
POWER DISSIPATION RATING PER SECTION IN WATTS	0.75 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	6120.0 MINIMUM AND 9720.0 MAXIMUM
SCREW THREAD DIAMETER	0.125 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH	32.0
SCREW THREAD SERIES DESIGNATOR	UNF
SECTION QUANTITY	1
SHAFT DIAMETER	0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
SHAFT LENGTH	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
TERMINAL LOCATION	REAR END
TERMINAL LENGTH	0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	18876-10211050 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial