|
|
|
National Stock Number:
5905-00-727-9759
Federal Supply Class:
5905
National Item Identification Number:
007279759
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 352250000756 | H0203 | THALES NEDERLAND B.V. | | 4171401-160 | 05869 | RAYTHEON COMPANY | | F20-681G | 00327 | WELWYN INTERNATIONAL INC | | 4171402-057 | 05869 | RAYTHEON COMPANY | | 4171402-57 | 05869 | RAYTHEON COMPANY | | 418296-89 | 96214 | RAYTHEON COMPANY | | RC35 | 37338 | NAUTEL LIMITED | | RL20S681G | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M22684-02-0089 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILR22684-2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RL20S681G | 84411 | AMERICAN SHIZUKI CORP | | VBE631-680E2 | H0203 | THALES NEDERLAND B.V. | | VBE631-680E2PCT | H0203 | THALES NEDERLAND B.V. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 680.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 70.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY DIAMETER | 0.161 INCHES MAXIMUM | | BODY LENGTH | 0.416 INCHES MAXIMUM | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.500 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22684/2 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -200.0 TO 200.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 | | TERMINAL LENGTH | 1.625 INCHES MAXIMUM | | TERMINAL TYPE | WIRE LEAD | | TERMINAL WIDTH | 0.036 INCHES MAXIMUM | | TEST DATA DOCUMENT | 81349-MIL-R-22684 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|