|
|
|
National Stock Number:
5905-00-733-4338
Federal Supply Class:
5905
National Item Identification Number:
007334338
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 106-332-0026 | 1K426 | MOOG INC. | | 106-332-0026 | 99932 | MOOG INC. | | AP09C426 | 02297 | ACE ELECTRONICS ASSOCIATES INC |
|
Techincal Specification:
| SECTION QUANTITY | 3 | | ELECTRICAL RESISTANCE PER SECTION | 20.000 KILOHMS 1ST SECTION | | 2.000 KILOHMS 2ND SECTION | | 2.000 KILOHMS 3RD SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 1ST SECTION | | -1.0 TO 1.0 2ND SECTION | | -1.0 TO 1.0 3RD SECTION | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ZERO BASED LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15 TO 0.15 ALL SECTIONS | | SHAFT RUNOUT | 0.002 INCHES | | LATERAL RUNOUT | 0.001 INCHES | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | SHAFT RADIAL PLAY | 0.001 INCHES | | SHAFT BEARING TYPE | BALL | | SHAFT END PLAY | 0.00300 INCHES | | MAXIMUM STARTING TORQUE | 0.75 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 0.75 INCH-OUNCES | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 1ST SECTION | | -670.0 TO 670.0 2ND SECTION | | -670.0 TO 670.0 3RD SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 HEAT SINK ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 0.7500 INCHES NOMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM | | BODY DIAMETER | 0.875 INCHES NOMINAL | | BODY LENGTH | 1.800 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | ACTUATOR TYPE | DOUBLE ENDED SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.1248 INCHES NOMINAL | | SHAFT LENGTH | 0.540 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 354.6 MINIMUM | | MOUNTING METHOD | CLAMP RING | | TERMINAL TYPE AND QUANTITY | 9 SOLDER STUD | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED |
|
|