|
|
|
National Stock Number:
5905-00-752-6680
Federal Supply Class:
5905
National Item Identification Number:
007526680
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
|
Techincal Specification:
| ACTUATOR TYPE | DOUBLE ENDED SHAFT | | ELECTRICAL RESISTANCE PER SECTION | 100.000 KILOHMS SINGLE SECTION | | FEATURES PROVIDED | NONMETALLIC SHAFT | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 12.0 FREE AIR SINGLE SECTION | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.138 INCHES NOMINAL | | MOUNTING METHOD | THREADED HOLE(S) | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.375 INCHES NOMINAL | | SHAFT LENGTH | 1.000 INCHES NOMINAL | | SHAFT STYLE | ROUND | | TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |
|
|