|
|
|
National Stock Number:
5905-00-787-9584
Federal Supply Class:
5905
National Item Identification Number:
007879584
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| M22-03-00192SH | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M22/03-00192SH | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-22/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILR22-3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RP102SH751KK | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 750.0 OHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SHAFT BEARING TYPE | SLEEVE | | MAXIMUM STOP TORQUE | 240.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 40.00 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 25.0 HEAT SINK SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 340.0 SINGLE SECTION | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 1.680 INCHES MAXIMUM | | BODY LENGTH | 1.410 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.328 INCHES MINIMUM AND | | 0.422 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND | | 0.251 INCHES MAXIMUM | | SHAFT LENGTH | 1.453 INCHES MINIMUM AND | | 1.547 INCHES MAXIMUM | | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 275.0 MINIMUM AND | | 305.0 MAXIMUM | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | NONTURN DEVICE LOCATION | AT 12 OCLOCK | | NONTURN DEVICE RADIUS | 0.485 INCHES MINIMUM AND | | 0.515 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | FEATURES PROVIDED | HUMIDITY PROOF | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 81349-MIL-R-22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22/3 GOVERNMENT SPECIFICATION | | OVERALL LENGTH | 2.957 INCHES MAXIMUM | | OVERALL DIAMETER | 2.260 INCHES MAXIMUM | | SPEC/STD CONTROLLING DATA | | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-22/3 | | MANUFACTURERS CODE | 81349 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M22/03-00192SH |
|
|