|
|
|
National Stock Number:
5905-00-789-5927
Federal Supply Class:
5905
National Item Identification Number:
007895927
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 116FTS254 | 08815 | HONEYWELL INTERNATIONAL INC | | 577R900H10 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | H060 | 04454 | SENSOR SYSTEMS, L.L.C. | | 752-6232 | 12205 | BUNKER RAMO CORP AMPHENOL CONTROLS DIV |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 1ST SECTION AND 7.5 KILOHMS 2ND SECTION AND 40.0 KILOHMS 3RD SECTION AND 7.5 KILOHMS 4TH SECTION AND 20.0 KILOHMS 5TH SECTION AND 20.0 KILOHMS 6TH SECTION AND 2.0 KILOHMS 7TH SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS | | BODY DIAMETER | 1.062 INCHES NOMINAL | | BODY LENGTH | 1.880 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FIRST FLAT LENGTH | 0.377 INCHES NOMINAL | | FLAT HEIGHT | 0.104 INCHES MINIMUM AND 0.106 INCHES MAXIMUM | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS EQUATION | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 1ST SECTION AND -1.00 TO 1.00 2ND SECTION AND -0.65 TO 0.65 3RD SECTION AND -1.00 TO 1.00 4TH SECTION AND -1.50 TO 1.50 5TH SECTION AND -1.50 TO 1.50 6TH SECTION AND -2.00 TO 2.00 7TH SECTION | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.0620 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING(S) | | SHAFT LENGTH | 0.437 INCHES NOMINAL | | SHAFT STYLE | ROUND, FLATTED | | PILOT DIAMETER | 0.9688 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | SECTION QUANTITY | 7 | | SHAFT DIAMETER | 0.1242 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.969 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM | | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED | | TERMINAL TYPE AND QUANTITY | 30 TURRET | | TEST DATA DOCUMENT | 97942-577R900 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|