5905-00-806-4769, RESISTOR,VARIABLE,WIRE WOUND,NON

5905-00-806-4772 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-806-4769

Federal Supply Class:
5905

National Item Identification Number:
008064769

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

240-1355P4	49956	RAYTHEON COMPANY
260P1-101	80294	BOURNS INSTRUMENTS INC

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	9000.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION	100.000 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	175.0 SINGLE SECTION
BODY HEIGHT	0.390 INCHES MINIMUM AND 0.422 INCHES MAXIMUM
BODY LENGTH	1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
BODY WIDTH	0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.100 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
CUBIC MEASURE	0.175 CUBIC INCHES
FRAGILITY FACTOR	MODERATELY RUGGED
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
OVERALL HEIGHT	0.780 INCHES MINIMUM AND 0.844 INCHES MAXIMUM
OVERALL LENGTH	1.261 INCHES MINIMUM AND 1.271 INCHES MAXIMUM
OVERALL WIDTH	0.343 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
MAXIMUM STARTING TORQUE	120.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY	2
MOUNTING HOLE DIAMETER	0.086 INCHES MINIMUM
MOUNTING METHOD	UNTHREADED HOLE AND TERMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	9000.0 NOMINAL
SECTION QUANTITY	1
SHAFT DIAMETER	0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
SHAFT LENGTH	0.035 INCHES NOMINAL
SHAFT STYLE	ROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-50.0 TO 50.0 SINGLE SECTION
TERMINAL LOCATION	LOWER ADJACENT SIDE TWO ROWS
TERMINAL LENGTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY	3 PIN

Click here to Register for Free 30-day Trial