|
|
|
National Stock Number:
5905-00-812-8069
Federal Supply Class:
5905
National Item Identification Number:
008128069
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| 7902416-14 | 90536 | LOCKHEED MARTIN CORP | | 903199-02 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | H33-470G | 14674 | CORNING GLASS WORKS | | H33-470G | 18612 | VISHAY INTERTECHNOLOGY, INC. | | 903199-02 | 90536 | LOCKHEED MARTIN CORP | | H33-470HM-5PCT | K4184 | VISHAY LTD | | H33470HMSG | 16299 | AVX CORP RALEIGH PLANT | | H33-470HM<5PCT | K4184 | VISHAY LTD | | H33-470HMSP0RM2PCT | K4184 | VISHAY LTD | | H33-47OHMSPORM2PCT | K4184 | VISHAY LTD |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 47.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 40.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 250.0 | | BODY DIAMETER | 0.525 INCHES NOMINAL | | BODY LENGTH | 2.250 INCHES NOMINAL | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 15.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -500.0 TO 500.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 235.0 | | TERMINAL LENGTH | 0.375 INCHES NOMINAL | | TERMINAL TYPE | FERRULE | | TEST DATA DOCUMENT | 90536-903199 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|