5905-00-812-8763 RESISTOR,FIXED,FILM Index 5305-00-812-8767 SCREW,MACHINE

National Stock Number:
5905-00-812-8765

Federal Supply Class:
5905

National Item Identification Number:
008128765

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
170-500402111VISHAY SPRAGUE INC
176WS-21108815HONEYWELL INTERNATIONAL INC
900217-11806481NORTHROP GRUMMAN SYSTEMS CORPORATION
PVR15K33199957BOWMAR/TIC INC SUB OF BOWMAR INSTRUMENT CORP


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER65.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BEARING TYPEBALL SHAFT
BODY DIAMETER1.432 INCHES MINIMUM AND 1.437 INCHES MAXIMUM
BODY LENGTH1.500 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FIXED TAP QUANTITY PER SECTION22 SINGLE SECTION
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.50 TO 0.50 SINGLE SECTION
LATERAL RUNOUT0.001 INCHES
OVERALL DIAMETER1.437 INCHES NOMINAL
OVERALL LENGTH2.380 INCHES NOMINAL
MAXIMUM RUNNING TORQUE0.25 INCH-OUNCES
MAXIMUM STARTING TORQUE0.25 INCH-OUNCES
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION0.5
MOUNTING LIP DEPTH0.0930 INCHES NOMINAL
MOUNTING LIP DIAMETER1.4320 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM
MOUNTING METHODCLAMP RING
PILOT LENGTH0.0620 INCHES NOMINAL
PILOT DIAMETER RUNOUT0.001 INCHES
PILOT DIAMETER1.3120 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.2495 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
SHAFT LENGTH0.500 INCHES MAXIMUM
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT END PLAY0.003 INCHES
SHAFT STYLEROUND, SLOTTED
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION30.0 SINGLE SECTION AND 45.0 SINGLE SECTION AND 60.0 SINGLE SECTION AND 75.0 SINGLE SECTION AND 90.0 SINGLE SECTION AND 105.0 SINGLE SECTION AND 120.0 SINGLE SECTION AND 135.0 SINGLE SECTION AND 150.0 SINGLE SECTION AND 165.0 SINGLE SECTION AND 180.0 SINGLE SECTION AND 195.0 SINGLE SECTION AND 210.0 SINGLE SECTION AND 225.0 SINGLE SECTION AND 240.0 SINGLE SECTION AND 255.0 SINGLE SECTION AND 270.0 SINGLE SECTION AND 285.0 SINGLE SECTION AND 300.0 SINGLE SECTION AND 315.0 SINGLE SECTION AND 330.0 SINGLE SECTION AND 345.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-1.0 TO 1.0 DEG ANGULAR ROTATION SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
TERMINAL LOCATIONREAR END
TERMINAL TYPE AND QUANTITY25 TURRET
UNDERCUT DIAMETER1.312 INCHES MINIMUM
UNDERCUT WIDTH0.0730 INCHES MINIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us