| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 320.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| BODY LENGTH | 0.812 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION |
| LATERAL RUNOUT | 0.001 INCHES |
| OVERALL DIAMETER | 1.062 INCHES NOMINAL |
| OVERALL LENGTH | 1.312 INCHES NOMINAL |
| MAXIMUM STARTING TORQUE | 0.10 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 20.00 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| PILOT DIAMETER | 0.7000 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.1 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 330.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT LENGTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| SHAFT STYLE | ROUND |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 DEG ANGULAR ROTATION SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 4 SOLDER STUD |
| UNDERCUT DIAMETER | 0.700 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |