|
|
|
National Stock Number:
5905-00-824-6900
Federal Supply Class:
5905
National Item Identification Number:
008246900
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 106-212-0065 | 58880 | MEGGITT (NEW HAMPSHIRE), INC | | 300-66H500 | 0EBU2 | VAMISTOR/WESTON DIV OF VAMISTOR CORP OF TENNESSEE INC | | 8976037-106 | 02734 | LOCKHEED MARTIN CORPORATION | | A8178 | 05584 | AUTODYNE MANUFACTURING CO INC | | 5905PL0306919 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 300-66H500 | 94271 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 15876.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY HEIGHT | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | BODY LENGTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES | | BODY WIDTH | 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.515 INCHES MINIMUM AND 0.525 INCHES MAXIMUM | | OVERALL HEIGHT | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | OVERALL LENGTH | 0.530 INCHES NOMINAL | | OVERALL WIDTH | 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 7.50 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 16200.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | SHAFT LENGTH | 0.030 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
|
|