5905-00-826-5252, RESISTOR,VARIABLE,WIRE WOUND,NON

4210-00-826-5253 STRAP ASSEMBLY,FIRE EXTINGUISHER

National Stock Number:
5905-00-826-5252

Federal Supply Class:
5905

National Item Identification Number:
008265252

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

10653097-1	18876	U S ARMY AVIATION AND MISSILE COMMAND
3065P-1-500	80294	BOURNS INSTRUMENTS INC
723914-004	05869	RAYTHEON COMPANY

Techincal Specification:

ELECTRICAL RESISTANCE PER SECTION	50.000 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	STOPS
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	25.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	85.0 SINGLE SECTION
BODY HEIGHT	0.310 INCHES NOMINAL
BODY LENGTH	0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
BODY WIDTH	0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.200 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.200 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
FEATURES PROVIDED	NONMETALLIC SHAFT
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS	0.825 INCHES MINIMUM AND 0.835 INCHES MAXIMUM
OVERALL HEIGHT	0.560 INCHES NOMINAL
OVERALL LENGTH	1.030 INCHES MINIMUM AND 1.090 INCHES MAXIMUM
OVERALL WIDTH	0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
MAXIMUM STARTING TORQUE	8.00 INCH-OUNCES
MOUNTING FACILITY QUANTITY	2
MOUNTING HOLE DIAMETER	0.088 INCHES MINIMUM
MOUNTING METHOD	UNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	5400.0 NOMINAL
SECTION QUANTITY	1
SHAFT DIAMETER	0.070 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SHAFT LENGTH	0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-320.0 TO 320.0 SINGLE SECTION
TERMINAL LOCATION	LOWER ADJACENT SIDE SINGLE ROW
TERMINAL LENGTH	0.250 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	18876-202 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial