|
|
|
National Stock Number:
5905-00-827-9756
Federal Supply Class:
5905
National Item Identification Number:
008279756
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
| 128C578H02 | 48306 | NORTHROP GRUMMAN SUPPORT SERVICES CORP | | 128C578H02 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 888SP100 | 10646 | CESIWID INC | | 888SP1000HM125W | 10646 | CESIWID INC | | 888SP101K | 10646 | CESIWID INC | | 888SP101K | 72819 | OHMITE HOLDING, L.L.C. | | G310060S7 | 24930 | L3HARRIS TECHNOLOGIES, INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 100.000 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 40.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 350.0 | | BODY DIAMETER | 1.000 INCHES NOMINAL | | BODY LENGTH | 6.250 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | FEAT | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 125.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -10.000 TO 10.000 | | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 450.0 | | TERMINAL LENGTH | 0.875 INCHES NOMINAL | | TERMINAL TYPE | FERRULE | | TEST DATA DOCUMENT | 89661-128C578H02 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|