| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 352.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS 1ST SECTION AND 2.000 KILOHMS 2ND SECTION AND 10.000 KILOHMS 3RD SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 80.0 ALL SECTIONS |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 1.000 INCHES NOMINAL |
| BODY LENGTH | 2.000 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | 1ST SECTION TERMINAL BASE LINEARITY AND 2ND SECTION INDEPENDENT LINEARITY AND 3RD SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 0.10 1ST SECTION AND -0.75 TO 0.75 2ND SECTION AND -0.75 TO 0.75 3RD SECTION |
| LATERAL RUNOUT | 0.001 INCHES |
| OVERALL DIAMETER | 1.320 INCHES NOMINAL |
| OVERALL LENGTH | 2.605 INCHES NOMINAL |
| MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT LENGTH | 0.0680 INCHES MINIMUM AND 0.0880 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| PILOT DIAMETER | 0.9995 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 3 |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT END PLAY | 0.00500 INCHES |
| SHAFT LENGTH | 0.454 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| SHAFT STYLE | ROUND, THREADED |
| SPECIAL FEATURES | 0.437 IN. MIN. FULLSPLINE ON SHAFT |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 1ST SECTION AND 1000.0 2ND SECTION AND 5000.0 3RD SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -100.0 TO 100.0 OHMS ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -85.0 TO 85.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 12 SOLDER STUD |
| THREAD LENGTH | 0.109 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.970 INCHES MINIMUM AND 0.980 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |