|
|
|
National Stock Number:
5905-00-833-4612
Federal Supply Class:
5905
National Item Identification Number:
008334612
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 11SF6853 | 25413 | ES BETA, INC | | 11SFG6853 | 25413 | ES BETA, INC | | 712-50-2 | 07031 | TEMPO INSTRUMENT INC DEFENSE ELECTRONICS DIV | | 712-50-2 | 48313 | B.C. SYSTEMS INC. | | 9156 | 04454 | SENSOR SYSTEMS, L.L.C. |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 343.0 MINIMUM | | ELECTRICAL RESISTANCE PER SECTION | 20.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 1.073 INCHES MAXIMUM | | BODY LENGTH | 0.768 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY | | LATERAL RUNOUT | 0.0015 INCHES | | MAXIMUM RUNNING TORQUE | 0.35 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 0.35 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.0620 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | SPECIAL FEATURES | 105 TOOTH GEAR ON REAR END OF RESISTOR | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | PILOT DIAMETER | 0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | BEARING | | SHAFT END PLAY | 0.00200 INCHES | | SHAFT DIAMETER | 0.1242 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.313 INCHES NOMINAL | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD | | TEST DATA DOCUMENT | 96467-712-50 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM | | UNDERCUT DIAMETER | 0.975 INCHES MAXIMUM |
|
|