| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 353.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 2.500 KILOHMS 1ST SECTION AND 1.000 KILOHMS 2ND SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| BEARING TYPE | BEARING SHAFT |
| BODY DIAMETER | 1.093 INCHES MAXIMUM |
| BODY LENGTH | 1.031 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FRAGILITY FACTOR | MODERATELY DELICATE |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20 TO 0.20 ALL SECTIONS |
| OVERALL DIAMETER | 1.500 INCHES NOMINAL |
| OVERALL LENGTH | 1.531 INCHES NOMINAL |
| MAXIMUM STARTING TORQUE | 0.125 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.437 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0600 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.0930 INCHES NOMINAL |
| MOUNTING METHOD | CLAMP RING AND THREADED HOLE |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PILOT DIAMETER | 1.0300 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 HEAT SINK ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 7.0 1ST SECTION AND -3.0 TO 3.0 2ND SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.086 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 56.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 2 |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| SHAFT LENGTH | 0.500 INCHES NOMINAL |
| SHAFT STYLE | ROUND, SLOTTED |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -650.0 TO 650.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 6 TURRET |
| UNDERCUT DIAMETER | 1.0025 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |