4720-00-840-2746 HOSE ASSEMBLY,NONMETALLIC Index 5961-00-840-2748 TRANSISTOR

National Stock Number:
5905-00-840-2747

Federal Supply Class:
5905

National Item Identification Number:
008402747

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
1004393718876U S ARMY AVIATION AND MISSILE COMMAND
55-150-03018065SAMARIUS PRECISION INSTRUMENTS, INC.
CM2588912697CLAROSTAT SENSORS AND CONTROLS


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION260.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION40.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
BEARING TYPEBALL SHAFT
BODY DIAMETER1.438 INCHES NOMINAL
BODY LENGTH1.000 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION TERMINAL BASE LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-1.00 TO 1.00 SINGLE SECTION
LATERAL RUNOUT0.001 INCHES
MAXIMUM RUNNING TORQUE0.40 INCH-OUNCES
MAXIMUM STARTING TORQUE0.60 INCH-OUNCES
MOUNTING LIP DEPTH0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM
MOUNTING LIP DIAMETER1.4220 INCHES MINIMUM AND 1.4530 INCHES MAXIMUM
MOUNTING METHODCLAMP RING
PILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
PILOT DIAMETER RUNOUT0.001 INCHES
PILOT DIAMETER1.3120 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-1.0 TO 1.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
SHAFT LENGTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT END PLAY0.0005 INCHES
SHAFT STYLEROUND
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS20000.0 SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY4 TURRET
UNDERCUT DIAMETER1.307 INCHES MINIMUM AND 1.317 INCHES MAXIMUM
UNDERCUT WIDTH0.0620 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us