|
|
|
National Stock Number:
5905-00-846-0212
Federal Supply Class:
5905
National Item Identification Number:
008460212
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 311-0096-00 | 80009 | TEKTRONIX, INC. | | 311-096 | 80009 | TEKTRONIX, INC. | | 33917 | 34263 | CTS CORP IN TEXAS DBA CTS ELECTRONICS CORP BROWNSVILLE DIV | | CM25468 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | PES001677 | 80133 | NAVY ELECTRONICS SUPPLY OFFICE |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 100.0 KILOHMS ALL SECTIONS | | ACTUATOR TYPE | DUAL CONCENTRIC | | BODY DIAMETER | 0.953 INCHES MAXIMUM | | BODY LENGTH | 1.308 INCHES MINIMUM AND 1.423 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | FEATURES PROVIDED | SWITCH | | MOUNTING BUSHING LENGTH | 0.364 INCHES MINIMUM AND 0.386 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM | | OPERATING POSITION | START OF ROTATION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 ALL SECTIONS | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.264 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | SHAFT STYLE | ROUND, STEPPED | | SHAFT LENGTH | 1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM | | SWITCH VOLTAGE RATING IN VOLTS | 150.0 | | SWITCH CONTACT ARRANGEMENT | DOUBLE POLE, SINGLE THROW, NORMALLY CLOSED | | SWITCH TYPE | ROTARY | | TERMINAL LOCATION | REAR-BOTTOM | | TERMINAL TYPE AND QUANTITY | 10 TAB, SOLDER LUG | | UNDERCUT DIAMETER | 0.186 INCHES MINIMUM AND 0.188 INCHES MAXIMUM | | UNDERCUT LENGTH | 0.500 INCHES NOMINAL |
|
|