| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 300.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 8.4 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 0.890 INCHES MAXIMUM |
| BODY LENGTH | 1.630 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| FIXED TAP QUANTITY PER SECTION | 3 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION |
| LATERAL RUNOUT | 0.001 INCHES |
| OVERALL DIAMETER | 1.101 INCHES MAXIMUM |
| OVERALL LENGTH | 2.130 INCHES NOMINAL |
| MAXIMUM STARTING TORQUE | 0.70 INCH-OUNCES |
| MAXIMUM STOP TORQUE | 100.00 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 0.8650 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| SPECIAL FEATURES | ADJUSTABLE BY SCREWDRIVER SLOT ON REAR END |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3620.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT LENGTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| SHAFT STYLE | ROUND |
| TAP LOCATION TOLERANCE PER SECTION | -0.5 TO 0.5 DEG ANGULAR ROTATION ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| UNDERCUT DIAMETER | 0.781 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |