|
|
|
National Stock Number:
5905-00-857-5006
Federal Supply Class:
5905
National Item Identification Number:
008575006
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| CM23689 | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 55.0 ALL SECTIONS | | TERMINAL TYPE AND QUANTITY | 9 TAB, SOLDER LUG | | BODY LENGTH | 1.750 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS | | OVERALL DIAMETER | 1.625 INCHES NOMINAL | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SCREW THREAD QUANTITY PER INCH | 32.0 | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SHAFT LENGTH | 0.500 INCHES NOMINAL | | FLAT HEIGHT | 0.218 INCHES NOMINAL | | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | MOUNTING METHOD | STANDARD BUSHING | | ELECTRICAL RESISTANCE PER SECTION | 35.0 OHMS ALL SECTIONS | | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | FIRST FLAT LENGTH | 0.375 INCHES NOMINAL | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | OVERALL LENGTH | 2.625 INCHES NOMINAL | | BODY DIAMETER | 1.125 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | TERMINAL LOCATION | REAR END | | NONTURN DEVICE LOCATION | AT 9 OCLOCK | | SECTION QUANTITY | 3 | | SHAFT STYLE | ROUND, FLATTED |
|
|