| ELECTRICAL RESISTANCE | 2.550 KILOHMS HIGHEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 1.240 KILOHMS LOWEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 1.830 KILOHMS INTERMEDIATE RESISTANCE VALUE |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 |
| BODY HEIGHT | 0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| BODY LENGTH | 1.170 INCHES MINIMUM AND 1.210 INCHES MAXIMUM |
| BODY WIDTH | 0.225 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| CUBIC MEASURE | 0.173 CUBIC INCHES |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE |
| INCLOSURE METHOD | ENCAPSULATED |
| POWER DISSIPATION RATING IN WATTS | 0.100 EACH RESISTOR HIGHEST RESISTANCE VALUE |
| POWER DISSIPATION RATING IN WATTS | 0.100 EACH RESISTOR LOWEST RESISTANCE VALUE |
| POWER DISSIPATION RATING IN WATTS | 0.300 EACH RESISTOR INTERMEDIATE RESISTANCE VALUE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -0.100 TO 0.100 EACH RESISTOR |
| SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY |
| STYLE DESIGNATOR | SINGLE INLINE |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 FIRST TEMP COEFFICIENT |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 TEMP RANGE OF FIRST TEMP COEFFICIENT |
| TERMINAL LENGTH | 1.000 INCHES NOMINAL |
| TERMINAL QUANTITY | 5 |
| TERMINAL TYPE | PIN |
| TEST DATA DOCUMENT | 98453-301874 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |