| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| BEARING TYPE | SLEEVE SHAFT |
| BODY DIAMETER | 1.062 INCHES NOMINAL |
| BODY LENGTH | 1.000 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 320.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS 1ST SECTION AND 5.0 KILOHMS 2ND SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS STEPPED CONFORMITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -2.00 TO 2.00 ALL SECTIONS |
| LATERAL RUNOUT | 0.002 INCHES |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| MAXIMUM RUNNING TORQUE | 4.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 10.00 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0 |
| MOUNTING BUSHING LENGTH | 0.313 INCHES NOMINAL |
| MOUNTING METHOD | STANDARD BUSHING |
| NONTURN DEVICE LOCATION | AT 12 OCLOCK |
| NONTURN DEVICE RADIUS | 0.375 INCHES NOMINAL |
| OVERALL DIAMETER | 1.438 INCHES NOMINAL |
| OVERALL LENGTH | 2.688 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 1ST SECTION AND -1.0 TO 1.0 2ND SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 330.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNEF |
| SECTION QUANTITY | 2 |
| SHAFT LENGTH | 1.688 INCHES NOMINAL |
| SHAFT DIAMETER | 0.250 INCHES MAXIMUM |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 ALL SECTIONS |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 6 TURRET |
| TEST DATA DOCUMENT | 29173-561C15 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |