| ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| BODY HEIGHT | 0.395 INCHES MINIMUM AND 0.415 INCHES MAXIMUM |
| BODY LENGTH | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| BODY WIDTH | 0.175 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| CUBIC MEASURE | 0.028 CUBIC INCHES |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 5400.0 MINIMUM AND 10800.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 200.0 OHMS SINGLE SECTION |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING HOLE DIAMETER | 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM |
| MOUNTING METHOD | UNTHREADED HOLE |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 5400.0 MINIMUM AND 10800.0 MAXIMUM |
| SECTION QUANTITY | 1 |
| SHAFT LENGTH | 0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.019 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| SHAFT STYLE | ROUND, SLOTTED |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| TERMINAL LENGTH | 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| TERMINAL LOCATION | REAR END |
| TERMINAL TYPE AND QUANTITY | 3 PIN |