| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| BODY DIAMETER | 2.005 INCHES MAXIMUM |
| BODY LENGTH | 1.050 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 180.0 MINIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION |
| FEATURES PROVIDED | HUMIDITY PROOF |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION GRAPH |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| PILOT DIAMETER | 1.8750 INCHES MAXIMUM |
| PILOT LENGTH | 0.0670 INCHES MAXIMUM |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0550 INCHES MINIMUM |
| MOUNTING LIP DIAMETER | 2.0050 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 0.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 1 |
| SHAFT LENGTH | 0.750 INCHES NOMINAL |
| SHAFT DIAMETER | 0.250 INCHES MAXIMUM |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| SPECIAL FEATURES | 0.033 IN. DIA THROUGH HOLE 0.156 IN. FROM SHAFT END |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 250.0 SINGLE SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -20.0 TO 0.0 OHMS SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0 TO 400.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 4 TURRET |
| TEST DATA DOCUMENT | 19200-1054539 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.870 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0550 INCHES MINIMUM |