|
|
|
National Stock Number:
5905-00-864-6665
Federal Supply Class:
5905
National Item Identification Number:
008646665
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| X900224-1 | 05257 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 105.0 SINGLE SECTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS SINGLE SECTION | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15 TO 0.15 SINGLE SECTION | | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 0.40 INCH-OUNCES | | MOUNTING METHOD | CLAMP RING | | OVERALL DIAMETER | 0.875 INCHES NOMINAL | | OVERALL LENGTH | 1.600 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.3 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 1.600 INCHES NOMINAL | | SHAFT DIAMETER | 0.875 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TAP LOCATION TOLERANCE PER SECTION | -0.5 TO 0.5 DEG ANGULAR ROTATION SINGLE SECTION | | TERMINAL TYPE AND QUANTITY | 4 SOLDER STUD |
|
|