| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 1.990 INCHES MINIMUM AND 2.005 INCHES MAXIMUM |
| BODY LENGTH | 2.094 INCHES MINIMUM AND 2.156 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 3602.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION |
| FIRST FLAT LENGTH | 0.375 INCHES NOMINAL |
| FLAT HEIGHT | 0.216 INCHES NOMINAL |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05 TO 0.05 SINGLE SECTION |
| LATERAL RUNOUT | 0.0015 INCHES |
| PILOT DIAMETER | 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PILOT DIAMETER RUNOUT | 0.0001 INCHES |
| MAXIMUM RUNNING TORQUE | 0.90 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 1.30 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.9900 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| OVERALL LENGTH | 2.594 INCHES MINIMUM AND 2.656 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3775.0 MINIMUM AND 3785.0 MAXIMUM |
| SECTION QUANTITY | 1 |
| SHAFT LENGTH | 1.188 INCHES NOMINAL |
| SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| SHAFT END PLAY | 0.005 INCHES |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.0005 INCHES |
| SHAFT STYLE | ROUND, FLATTED |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| UNDERCUT DIAMETER | 1.812 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |