5905-00-865-5653 RESISTOR,FIXED,WIRE WOUND,INDUCT Index 5910-00-865-5663 CAPACITOR,FIXED,PLASTIC DIELECTR

National Stock Number:
5905-00-865-5656

Federal Supply Class:
5905

National Item Identification Number:
008655656

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
342004454SENSOR SYSTEMS, L.L.C.
517000041K426MOOG INC.
5170000499932MOOG INC.


Techincal Specification:
ACTUATOR TYPESINGLE SHAFT
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
BEARING TYPEBALL SHAFT
BODY DIAMETER1.062 INCHES MAXIMUM
BODY LENGTH1.140 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION350.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS ALL SECTIONS
FIXED TAP QUANTITY PER SECTION1 1ST SECTION AND 1 2ND SECTION
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
PILOT DIAMETER0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM
PILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE0.60 INCH-OUNCES
MAXIMUM STARTING TORQUE0.70 INCH-OUNCES
MOUNTING LIP DEPTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
MOUNTING LIP DIAMETER1.0620 INCHES MAXIMUM
MOUNTING METHODCLAMP RING
OVERALL DIAMETER1.285 INCHES MAXIMUM
OVERALL LENGTH1.515 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 ALL SECTIONS
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY2
SHAFT LENGTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
SHAFT DIAMETER0.124 INCHES NOMINAL
SHAFT END PLAY0.005 INCHES
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT STYLEROUND
TAP LOCATION TOLERANCE PER SECTION-2.0 TO 2.0 DEG ANGULAR ROTATION ALL SECTIONS
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION300.0 ALL SECTIONS
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-670.0 TO 670.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY8 SOLDER STUD
UNDERCUT DIAMETER0.975 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us