|
|
|
National Stock Number:
5905-00-889-2553
Federal Supply Class:
5905
National Item Identification Number:
008892553
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 140-186 | 02111 | VISHAY SPRAGUE INC | | 84136-2 | 53397 | NUMAX ELECTRONICS INC |
|
Techincal Specification:
| SCREW THREAD QUANTITY PER INCH | 32.0 | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | MOUNTING METHOD | STANDARD BUSHING | | TERMINAL LENGTH | 0.147 INCHES MINIMUM AND 0.157 INCHES MAXIMUM | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | TEST DATA DOCUMENT | 39015-84136-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 240.0 NOMINAL | | SECTION QUANTITY | 1 | | MOUNTING BUSHING LENGTH | 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM | | BODY DIAMETER | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION | | SHAFT STYLE | ROUND, SLOTTED | | BODY LENGTH | 0.305 INCHES NOMINAL | | TERMINAL LOCATION | REAR END | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL | | MAXIMUM RUNNING TORQUE | 0.20 INCH-OUNCES | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | SHAFT BEARING TYPE | BEARING | | MAXIMUM STARTING TORQUE | 0.20 INCH-OUNCES | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | SCREW THREAD SERIES DESIGNATOR | UNEF | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | TERMINAL TYPE AND QUANTITY | 4 SOLDER STUD | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | SHAFT LENGTH | 0.382 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
|
|