|
|
|
National Stock Number:
5905-00-928-2982
Federal Supply Class:
5905
National Item Identification Number:
009282982
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 5033-003 | 82268 | SPARTON CORPORATION |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | BODY HEIGHT | 0.295 INCHES MINIMUM AND 0.335 INCHES MAXIMUM | | BODY LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY WIDTH | 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | OVERALL HEIGHT | 0.295 INCHES MINIMUM AND 0.335 INCHES MAXIMUM | | OVERALL LENGTH | 1.050 INCHES NOMINAL | | OVERALL WIDTH | 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.8 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM | | SHAFT DIAMETER | 0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
|
|