| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 100.0 ALL SECTIONS |
| BEARING TYPE | BEARING SHAFT |
| BODY DIAMETER | 1.099 INCHES MINIMUM AND 1.109 INCHES MAXIMUM |
| BODY LENGTH | 3.360 INCHES MINIMUM AND 3.400 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS ALL SECTIONS |
| FEATURES PROVIDED | HUMIDITY PROOF |
| FIXED TAP QUANTITY PER SECTION | 8 1ST SECTION AND 9 2ND SECTION AND 9 3RD SECTION AND 9 4TH SECTION AND 8 5TH SECTION AND 8 6TH SECTION AND 8 7TH SECTION |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 ALL SECTIONS |
| PILOT DIAMETER | 0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM |
| PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 4.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 4.00 INCH-OUNCES |
| MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.25 |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.0520 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING AND THREADED STUD |
| MOUNTING STUD LENGTH | 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.112 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 40.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 8 |
| SHAFT LENGTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| SHAFT END PLAY | 0.001 INCHES |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 166.0 1ST SECTION AND 313.0 1ST SECTION AND 280.0 1ST SECTION AND 187.0 1ST SECTION AND 153.0 1ST SECTION AND 0.0 1ST SECTION AND 213.0 1ST SECTION AND 350.0 1ST SECTION AND 184.0 2ND SECTION AND 161.0 2ND SECTION AND 313.0 2ND SECTION AND 296.0 2ND SECTION AND 149.0 2ND SECTION AND 137.0 2ND SECTION AND 0.0 2ND SECTION AND 263.0 2ND SECTION AND 350.0 2ND SECTION AND 158.0 3RD SECTION AND 234.0 3RD SECTION AND 222.0 3RD SECTION AND 170.0 3RD SECTION AND 146.0 3RD SECTION AND 134.0 3RD SECTION AND 0.0 3RD SECTION AND 210.0 3RD SECTION AND 350.0 3RD SECTION AND 118.0 4TH SECTION AND 220.0 4TH SECTION AND 207.0 4TH SECTION AND 195.0 4TH SECTION AND 130.0 4TH SECTION AND 142.0 4TH SECTION AND 0.0 4TH SECTION AND 170.0 4TH SECTION AND 350.0 4TH SECTION AND 80.0 5TH SECTION AND 200.0 5TH SECTION AND 187.0 5TH SECTION AND 115.0 5TH SECTION AND 12.0 5TH SECTION AND 0.0 5TH SECTION AND 175.0 5TH SECTION AND 350.0 5TH SECTION AND 53.0 6TH SECTION AND 177.0 6TH SECTION AND 198.0 6TH SECTION AND 12.0 6TH SECTION AND 0.0 6TH SECTION AND 150.0 6TH SECTION AND 119.0 6TH SECTION AND 350.0 6TH SECTION AND 48.0 7TH SECTION AND 152.0 7TH SECTION AND 140.0 7TH SECTION AND 109.0 7TH SECTION AND 12.0 7TH SECTION AND 0.0 7TH SECTION AND 128.0 7TH SECTION AND 350.0 7TH SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 77 TURRET |
| TEST DATA DOCUMENT | 80045-361644 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.052 INCHES MINIMUM AND 1.067 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |