|
|
|
National Stock Number:
5905-00-931-0105
Federal Supply Class:
5905
National Item Identification Number:
009310105
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 710R5K | 73138 | BI TECHNOLOGIES CORPORATION | | 71CR5K | 73138 | BI TECHNOLOGIES CORPORATION |
|
Techincal Specification:
| ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY HEIGHT | 0.255 INCHES NOMINAL | | BODY LENGTH | 0.500 INCHES NOMINAL | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES | | BODY WIDTH | 0.500 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 15120.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION | | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL | | MOUNTING METHOD | UNTHREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 15120.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.040 INCHES MAXIMUM | | SHAFT DIAMETER | 0.060 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2500.0 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -5.0 TO 5.0 OHMS SINGLE SECTION | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION | | TERMINAL LENGTH | 0.188 INCHES NOMINAL | | TERMINAL LOCATION | LEFT ADJACENT SIDE TWO ROWS | | TERMINAL TYPE AND QUANTITY | 4 PIN |
|
|