|
|
|
National Stock Number:
5905-00-932-4202
Federal Supply Class:
5905
National Item Identification Number:
009324202
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 1200-581-1 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. | | 3580S363-1581 | 80294 | BOURNS INSTRUMENTS INC | | 78WS229 | 08815 | HONEYWELL INTERNATIONAL INC | | 5523-150 | 11871 | RECON/OPTICAL, INC. | | 5523-150REV8 | 11871 | RECON/OPTICAL, INC. | | 5523-150REV8 | 80294 | BOURNS INSTRUMENTS INC |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 1.58 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION | | SHAFT BEARING TYPE | BEARING | | SHAFT END PLAY | 0.005 INCHES | | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 71.0 SINGLE SECTION | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 0.7490 INCHES MINIMUM AND | | 0.7500 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.780 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL | | BODY DIAMETER | 0.890 INCHES MAXIMUM | | BODY LENGTH | 0.720 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | SHAFT LENGTH | 0.563 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 265.0 NOMINAL | | MOUNTING METHOD | CLAMP RING | | FEATURES PROVIDED | NONMETALLIC SHAFT | | TERMINAL TYPE AND QUANTITY | 4 TURRET | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 11871-5523-150 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 1.437 INCHES NOMINAL |
|
|