5961-00-932-4985 RETAINER,SEMICONDUCTOR DEVICE Index 5310-00-932-4989 HOOK,HATCH,DRIVERS

National Stock Number:
5905-00-932-4986

Federal Supply Class:
5905

National Item Identification Number:
009324986

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
1000-016033051LILBERN DESIGN OF VIRGINIA LLC
3550S1-20280294BOURNS INSTRUMENTS INC


Techincal Specification:
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BEARING TYPEBALL SHAFT
BODY DIAMETER0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM
BODY LENGTH1.580 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 MINIMUM AND 3610.0 MINIMUM
ELECTRICAL RESISTANCE PER SECTION2.000 KILOHMS SINGLE SECTION
FEATURES PROVIDEDNONMETALLIC SHAFT
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.20 TO 0.20 SINGLE SECTION
LATERAL RUNOUT0.003 INCHES
PILOT LENGTH0.05700 INCHES MINIMUM AND 0.06700 INCHES MAXIMUM
PILOT DIAMETER RUNOUT0.00150 INCHES
PILOT DIAMETER0.62450 INCHES MINIMUM AND 0.62500 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE0.30 INCH-OUNCES
MAXIMUM STARTING TORQUE0.40 INCH-OUNCES
MAXIMUM STOP TORQUE96.00 INCH-OUNCES
MOUNTING LIP DEPTH0.05700 INCHES MINIMUM AND 0.06700 INCHES MAXIMUM
MOUNTING LIP DIAMETER0.85900 INCHES MINIMUM AND 0.89100 INCHES MAXIMUM
MOUNTING METHODCLAMP RING
OVERALL LENGTH1.955 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS2.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3600.0 MINIMUM AND 3610.0 MAXIMUM
SECTION QUANTITY1
SHAFT LENGTH0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
SHAFT DIAMETER0.125 INCHES NOMINAL
SHAFT END PLAY0.00300 INCHES
SHAFT RADIAL PLAY0.002 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT STYLEROUND
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS-20.0 TO 20.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TURRET
UNDERCUT DIAMETER0.781 INCHES MAXIMUM
UNDERCUT WIDTH0.05700 INCHES MINIMUM AND 0.06700 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us