| ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| BODY HEIGHT | 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| BODY LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| BODY WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM |
| FEATURES PROVIDED | NONMETALLIC SHAFT |
| OVERALL HEIGHT | 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| OVERALL LENGTH | 1.300 INCHES MINIMUM AND 1.340 INCHES MAXIMUM |
| OVERALL WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING HOLE DIAMETER | 0.088 INCHES MINIMUM |
| MOUNTING METHOD | UNTHREADED HOLE |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| SHAFT LENGTH | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| SHAFT STYLE | ROUND, SLOTTED |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0 TO 70.0 SINGLE SECTION |
| TERMINAL LENGTH | 0.500 INCHES NOMINAL |
| TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| TERMINAL TYPE AND QUANTITY | 3 PIN |