|
|
|
National Stock Number:
5905-00-933-9206
Federal Supply Class:
5905
National Item Identification Number:
009339206
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 10893853 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 10893853 | 24681 | MEMCOR INC | | 10893853 | 44655 | OHMITE HOLDING, L.L.C. | | 5905-933-9206 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 5905009339206 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 100.000 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 40.0 SINGLE SECTION | | BODY DIAMETER | 1.750 INCHES MINIMUM AND 1.888 INCHES MAXIMUM | | BODY LENGTH | 1.750 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | OVERALL DIAMETER | 1.750 INCHES MINIMUM AND 1.888 INCHES MAXIMUM | | OVERALL LENGTH | 2.960 INCHES MINIMUM AND 3.060 INCHES MAXIMUM | | MOUNTING BUSHING LENGTH | 0.340 INCHES MINIMUM AND 0.420 INCHES MAXIMUM | | MOUNTING METHOD | LOCKING BUSHING | | NONTURN DEVICE LOCATION | AT 3 OCLOCK | | NONTURN DEVICE RADIUS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 1ST SECTION | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | SHAFT LENGTH | 0.440 INCHES NOMINAL | | SHAFT STYLE | ROUND | | SPECIAL FEATURES | CABLE 16.38 IN. MIN,17.38 IN. MAX LG SOLDERED TO EACH TERMINAL | | TERMINAL LENGTH | 0.380 INCHES NOMINAL | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
|
|