5905-00-936-4275, RESISTOR,VARIABLE,NONWIRE WOUND,

5905-00-936-4276 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-936-4275

Federal Supply Class:
5905

National Item Identification Number:
009364275

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

10179167	18876	U S ARMY AVIATION AND MISSILE COMMAND
300FTS111	08815	HONEYWELL INTERNATIONAL INC
30FTS111	08815	HONEYWELL INTERNATIONAL INC
63539	04454	SENSOR SYSTEMS, L.L.C.
63549	04454	SENSOR SYSTEMS, L.L.C.

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	355.0 MINIMUM
ELECTRICAL RESISTANCE PER SECTION	20.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
BODY DIAMETER	2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM
BODY LENGTH	1.084 INCHES MAXIMUM
BODY STYLE	CYLINDRICAL SERVO MOUNTED
FEATURES PROVIDED	NONMETALLIC SHAFT
FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.10 TO 0.10 SINGLE SECTION
LATERAL RUNOUT	0.003 INCHES
OVERALL DIAMETER	3.261 INCHES MAXIMUM
OVERALL LENGTH	2.178 INCHES NOMINAL
MAXIMUM STARTING TORQUE	2.00 INCH-OUNCES
MOUNTING LIP DEPTH	0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM
MOUNTING LIP DIAMETER	2.9900 INCHES MINIMUM AND 3.0100 INCHES MAXIMUM
MOUNTING METHOD	CLAMP RING
PILOT DIAMETER RUNOUT	0.001 INCHES
PILOT DIAMETER	2.8740 INCHES MINIMUM AND 2.8760 INCHES MAXIMUM
PILOT LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS	1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL
SECTION QUANTITY	1
SHAFT DIAMETER	0.250 INCHES NOMINAL
SHAFT RADIAL PLAY	0.003 INCHES
SHAFT RUNOUT	0.001 INCHES
SHAFT STYLE	ROUND
SHAFT LENGTH	1.078 INCHES MINIMUM AND 1.109 INCHES MAXIMUM
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-4.0 TO 4.0 SINGLE SECTION
TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY	3 SOLDER STUD
TEST DATA DOCUMENT	18876-10179167 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
UNDERCUT WIDTH	0.0730 INCHES MINIMUM
UNDERCUT DIAMETER	2.875 INCHES NOMINAL

Click here to Register for Free 30-day Trial