|
|
|
National Stock Number:
5905-00-936-4935
Federal Supply Class:
5905
National Item Identification Number:
009364935
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 1951887-2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7920.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 100.000 OHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION | | BODY HEIGHT | 0.330 INCHES MAXIMUM | | BODY LENGTH | 1.260 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY WIDTH | 0.200 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.700 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.900 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | ZZZY | | MOUNTING METHOD | UNTHREADED HOLE | | OVERALL HEIGHT | 0.830 INCHES MAXIMUM | | OVERALL LENGTH | 1.330 INCHES MAXIMUM | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7920.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.110 INCHES NOMINAL | | SHAFT LENGTH | 0.070 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY NAVORD OD42046 | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0/+70.0 SINGLE SECTION | | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW | | TERMINAL LENGTH | 0.500 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 3 PIN | | TEST DATA DOCUMENT | 10001-1951887-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|