|
|
|
National Stock Number:
5905-00-942-0158
Federal Supply Class:
5905
National Item Identification Number:
009420158
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| A11055 | 06442 | MIRION TECHNOLOGIES (CANBERRA), INC. | | BA411-051 | 71590 | CRL COMPONENTS INC |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 356.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 | | ANGLE OF MOUNTING HOLE IN DEG | 90.0 | | BEARING TYPE | BALL SHAFT | | BODY DIAMETER | 2.000 INCHES NOMINAL | | BODY LENGTH | 0.968 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG SINE | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.50 TO 1.50 SINGLE SECTION | | LATERAL RUNOUT | 0.006 INCHES | | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 0.80 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 3 | | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.531 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 2.00000 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING AND THREADED HOLE | | PILOT DIAMETER | 1.87500 INCHES NOMINAL | | PILOT LENGTH | 0.06200 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.00150 INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 3.5 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNC | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 0.625 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT END PLAY | 0.00500 INCHES | | SHAFT STYLE | ROUND | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TURRET | | UNDERCUT DIAMETER | 1.875 INCHES NOMINAL | | UNDERCUT WIDTH | 0.06200 INCHES NOMINAL |
|
|